Researchers from the University of Bern, Inselspital, Bern University Hospital and the Swiss Center for Electronics and Microtechnology have developed a high-precision, sensor-based surgical robot for spinal operations, together with industry partners. Their project is being funded with two million Swiss francs (£1.5m) over a period of four years. It is being sponsored by the “BRIDGE” programme of the Swiss National Science Foundation and the Commission for Technology and Innovation.
Within the scope of the project, entitled “Towards intelligent sensor-enhanced robotic neurosurgery”, Andreas Raabe from the Department of Neurosurgery at Inselspital, Bern University Hospital, Stefan Weber from ARTORG Center for Biomedical Engineering at the University of Bern and Olivier Chételat from the Swiss Center for Electronics and Microtechnology (CSEM) are developing a sensor-enabled surgical technology that provides a new level of safety for complicated spinal operations.
Manual spine stabilisation surgery is one of the most frequent back surgeries performed and numbers are rising with an ageing population requiring more and more surgical procedures to address degenerative spine disease. The challenge of manual spine surgery using pedicle screws to fuse and stabilise functionally unstable vertebrae is the “uneven terrain” of vertebral bone. The functional articulation of the human vertebral spine that confers lateral and rotational mobility, static stability and compressional strength is only possible because vertebrae have a complex shape and bone density composition. Drilling and positioning a screw into a highly variable part of the spine, whether manually or with image guidance technologies fails to be a success around 15 per cent of the time. The screw misses the central part of the vertebrae and the sharp tip sticks out, in many cases to irritate surrounding tissue or nerves.
Sensor-enabled surgical robotic drilling technology turns the variability of the vertebrae from a surgical challenge into the basis of precision surgical procedures. By using the complexity of vertebral anatomy like a “sensor map” the robotic drill is able to “feel” across the bone terrain and together with so-called Electromyography (EMG) neuro-monitoring can avoid obstacles including nerves and boundaries of the bone. Thicker bone, thinner bone and nerves are sensed with super-human, robotic perception and verified at high speed with the relevant information from the imaging information that was established before the procedure. This way the surgical robotic technology potentially allows the neurosurgeon to place pedicle screws perfectly and with precision in every patient, every time.
The aim of this “BRIDGE Discovery” project is to introduce this augmented, robotic technology into the clinic and begin the process of clinical adoption of the next generation of neurosurgical interventions.
“For the first time the neurosurgeon has real-time data on where the drilling instrument is during the procedure and the surgical robot acts with supreme accuracy, shutting down the drilling far sooner that a human operator could, thereby avoiding breakthrough or injury. This means potentially zero morbidity procedures with respect to pedicle screw misplacement. We see this as the future of spine surgery”, commented Andreas Raabe.
“The use of EMG as a cross check control loop to give early warning on the proximity of nerve tissue and the overall integration of a sensor-driven surgical robotic system is a ground-breaking use of this technology in neurosurgery and will lead to many other clinical applications going forward”, said Olivier Chételat.
Source: University of Bern